Post Reply 
HP-15C CE speed improvement over OG 15C
08-22-2024, 03:25 PM
Post: #1
HP-15C CE speed improvement over OG 15C
It's obvious that the 15C CE was going to be a lot faster than the original 15C but I wanted to get an idea of how much faster, so I decided to let them both loose on a problem that should involve quite a bit of number crunching. I settled on the problem entitled "Using the Solver with Simultaneous Equations" om pp168-169 of "Programming Examples and Techniques" for the HP-42S (see https://literature.hpcalc.org/items/934).

My OG HP-15C chewed through it in approx. 1m15s, which I thought was pretty good for a calculator that was never particularly fast in the first place repeatedly solving a 4x4 system of linear equations until the correct value for one of the coefficients is found.

The HP-15C CE tore through it in a fraction of a second.

Case closed.

Current daily drivers: HP-41CL, HP-15C, HP-16C
Find all posts by this user
Quote this message in a reply
08-22-2024, 03:31 PM
Post: #2
RE: HP-15C CE speed improvement over OG 15C
(08-22-2024 03:25 PM)RPNerd Wrote:  The HP-15C CE tore through it in a fraction of a second.

Yeah. Modern 32-bit (ARM) based models are much faster even when emulating original NUT code. My 2022 HP-12C+ does the same thing :-)

HP-15C (2234A02xxx), HP-16C (2403A02xxx), HP-15C CE (9CJ323-03xxx), HP-20S (2844A16xxx), HP-12C+ (9CJ251)

Find all posts by this user
Quote this message in a reply
08-22-2024, 03:42 PM
Post: #3
RE: HP-15C CE speed improvement over OG 15C
(08-22-2024 03:31 PM)AnnoyedOne Wrote:  Yeah. Modern 32-bit (ARM) based models are much faster even when emulating original NUT code.

Even my SwissMicros DM15L (also ARM 32-bit emulating NUT code) running at 48 MHz needed about 4 seconds to get the answer (about 18s @ 12 MHz).

Current daily drivers: HP-41CL, HP-15C, HP-16C
Find all posts by this user
Quote this message in a reply
08-22-2024, 03:51 PM (This post was last modified: 08-22-2024 03:51 PM by AnnoyedOne.)
Post: #4
RE: HP-15C CE speed improvement over OG 15C
(08-22-2024 03:42 PM)RPNerd Wrote:  Even my SwissMicros DM15L...

I considered buying one of those but heard about the HP-15C CE and got one of those instead.

The DM15L uses a NXP LPC1115 with has a ARM Cortex M0 core. The HP-15C CE has a Cortex M4. About 4x faster it seems.

I was actually looking hard at using a LPC111x in a new design in 2009. In the end I stuck with the Cortex M3 chip I'd already used.

A1

HP-15C (2234A02xxx), HP-16C (2403A02xxx), HP-15C CE (9CJ323-03xxx), HP-20S (2844A16xxx), HP-12C+ (9CJ251)

Find all posts by this user
Quote this message in a reply
Post Reply 




User(s) browsing this thread: 1 Guest(s)