pyILPER 1.6.0 and LIFUTILS 1.7.7 final release
|
02-04-2018, 06:07 PM
Post: #21
|
|||
|
|||
RE: pyILPER 1.6.0 and LIFUTILS 1.7.7 final release
(02-04-2018 12:34 PM)Geir Isene Wrote: I have only tested taking the programs from the printer log - bacuase I need programs from my 41 to include in modules I create - and the printer log is the easiest way to do that.Could you please provide me a little example (raw file preferred) of a HP-41 program with synthetic strings? You can also use the "View" function of the drive directory listing to obtain the FOCAL code of a HP-41 progam file. |
|||
02-05-2018, 06:32 PM
Post: #22
|
|||
|
|||
RE: pyILPER 1.6.0 and LIFUTILS 1.7.7 final release
hi,
I'm trying but I need some help, as I get an error "illegal retval" and in the same time "not connected to pilbox". PILBOX is ok on COM3 (Windows) and works well with ILCtrl. Thanks! Salvo ∫aL√0mic (IT9CLU) :: HP Prime 50g 41CX 71b 42s 39s 35s 12C 15C - DM42, DM41X - WP34s Prime Soft. Lib |
|||
02-05-2018, 07:04 PM
Post: #23
|
|||
|
|||
RE: pyILPER 1.6.0 and LIFUTILS 1.7.7 final release
Try searching for a solution first. This was posted only 4 days ago.
http://www.hpmuseum.org/forum/thread-10065.html |
|||
02-05-2018, 07:30 PM
(This post was last modified: 02-05-2018 09:00 PM by salvomic.)
Post: #24
|
|||
|
|||
RE: pyILPER 1.6.0 and LIFUTILS 1.7.7 final release
(02-05-2018 07:04 PM)Dave Frederickson Wrote: Try searching for a solution first. This was posted only 4 days ago. sorry, for now I'm inattentive, happy doing experiments with PILbox, new toy for me... thank you Dave, I'll read there. Salvo EDIT: Found (in Mac OS X): it works with 115200 and not with 230400 Bd in configuration of PILbox ∫aL√0mic (IT9CLU) :: HP Prime 50g 41CX 71b 42s 39s 35s 12C 15C - DM42, DM41X - WP34s Prime Soft. Lib |
|||
02-05-2018, 09:06 PM
Post: #25
|
|||
|
|||
RE: pyILPER 1.6.0 and LIFUTILS 1.7.7 final release
(02-05-2018 07:30 PM)salvomic Wrote: sorry, for now I'm inattentive, happy doing experiments with PILbox, new toy for me... Salvo, the PIL-Box has a jumper that sets the baud-rate option 115KB or 230KB. The 230KB is obviously faster, but the 'feeling' is even faster than it sounds and I recommend using 230KB if you can; I am fairly sure it will work at 230KB on OSX, but what s/w are you using? IL-Per under some Windows subsystem (parallels, etc.) or pyILPer ? --Bob Prosperi |
|||
02-05-2018, 09:40 PM
Post: #26
|
|||
|
|||
RE: pyILPER 1.6.0 and LIFUTILS 1.7.7 final release
(02-05-2018 09:06 PM)rprosperi Wrote: Salvo, the PIL-Box has a jumper that sets the baud-rate option 115KB or 230KB. The 230KB is obviously faster, but the 'feeling' is even faster than it sounds and I recommend using 230KB if you can; I am fairly sure it will work at 230KB on OSX, but what s/w are you using? hi Bob, I'm testing pyILPer now. Today I set cables and started with PILbox and I saw the jumper set was the #2; should I test put in in #3? Salvo ∫aL√0mic (IT9CLU) :: HP Prime 50g 41CX 71b 42s 39s 35s 12C 15C - DM42, DM41X - WP34s Prime Soft. Lib |
|||
02-05-2018, 10:36 PM
(This post was last modified: 02-05-2018 11:06 PM by salvomic.)
Post: #27
|
|||
|
|||
RE: pyILPER 1.6.0 and LIFUTILS 1.7.7 final release
(11-28-2017 06:37 PM)jsi Wrote: This release of pyILPER includes lots of enhancements, improvements and changes, see the release notes for details. Thanks a lot, Joachim! I'm enjoying very much with this program and PILbox (I find very good also ILper). Installed with a glitch both in Mac OS X 10.13.3 and Windows 10 (inside Parallels 13). I'm testing HP-41CX and HP-71b. I'd like to have a set of preconfigured programs (LIF...) where to pick and install in the calculator (using the program not only to backup all - very important job - or printing, very amazing to get PDF from the "old machines")... Like a sort or "repository" (two series, for 71B and 41C) or "carry and cash (without cash)" of programs ![]() About this purpose, it would be nice to could edit the virtual devices (disks, LIF, DAT...) to put (not only delete) programs to load, then, in the calculator; with the goal to share nice configurations, sets,... EDIT: though I'm testing to import with Tools from some ROMs, it is not exactly what I'd prefer: I would like to import some parts by a list of programs in them, not the whole ROM... Salvo ∫aL√0mic (IT9CLU) :: HP Prime 50g 41CX 71b 42s 39s 35s 12C 15C - DM42, DM41X - WP34s Prime Soft. Lib |
|||
02-05-2018, 10:43 PM
Post: #28
|
|||
|
|||
RE: pyILPER 1.6.0 and LIFUTILS 1.7.7 final release
(02-05-2018 09:40 PM)salvomic Wrote: hi Bob, No, JP3 is not used. JP2 - Jumper ON - 115KB JP2 - Jumper OFF - 230KB So just remove the jumper. --Bob Prosperi |
|||
02-05-2018, 10:52 PM
Post: #29
|
|||
|
|||
RE: pyILPER 1.6.0 and LIFUTILS 1.7.7 final release
(02-05-2018 10:43 PM)rprosperi Wrote: No, JP3 is not used. ok! Then, removing JP2 now in Mac OS X the program runs at 230KB (and returns "illegal retval at 115KB). For me is ok, thanks for advice. Salvo ∫aL√0mic (IT9CLU) :: HP Prime 50g 41CX 71b 42s 39s 35s 12C 15C - DM42, DM41X - WP34s Prime Soft. Lib |
|||
02-05-2018, 11:06 PM
Post: #30
|
|||
|
|||
RE: pyILPER 1.6.0 and LIFUTILS 1.7.7 final release
(02-05-2018 10:43 PM)rprosperi Wrote: No, JP3 is not used. JP3 fixes an issue with some 1A HP-IL modules for the 71B. http://www.hpmuseum.org/forum/thread-100...l#pid89843 Dave |
|||
02-05-2018, 11:08 PM
Post: #31
|
|||
|
|||
RE: pyILPER 1.6.0 and LIFUTILS 1.7.7 final release
(02-05-2018 11:06 PM)Dave Frederickson Wrote: JP3 fixes an issue with some 1A HP-IL modules for the 71B. thanks. Mine is 1A (in HP71 1BBBB). Salvo ∫aL√0mic (IT9CLU) :: HP Prime 50g 41CX 71b 42s 39s 35s 12C 15C - DM42, DM41X - WP34s Prime Soft. Lib |
|||
02-05-2018, 11:11 PM
Post: #32
|
|||
|
|||
RE: pyILPER 1.6.0 and LIFUTILS 1.7.7 final release
Sorry, Dave's right, I was not clear; JP3 is not used for setting baud rate...
--Bob Prosperi |
|||
02-05-2018, 11:16 PM
Post: #33
|
|||
|
|||
RE: pyILPER 1.6.0 and LIFUTILS 1.7.7 final release
(02-05-2018 11:11 PM)rprosperi Wrote: Sorry, Dave's right, I was not clear; JP3 is not used for setting baud rate... Understood, thanks ![]() For now I'll keep JP2 off and JP3 off; if there will be issues I'll try JP3 on. I checked JP2 off in Mac OS X and Windows 10 also: ok with 230kb in pyILper and ILCtrl. Also in Windows, now at 115KB pyILper returns "illegal retval". salvo ∫aL√0mic (IT9CLU) :: HP Prime 50g 41CX 71b 42s 39s 35s 12C 15C - DM42, DM41X - WP34s Prime Soft. Lib |
|||
02-06-2018, 12:42 AM
Post: #34
|
|||
|
|||
RE: pyILPER 1.6.0 and LIFUTILS 1.7.7 final release
(02-05-2018 11:16 PM)salvomic Wrote: Understood, thanks Great, looks like all is working properly. You'll love the PIL-Box and wonder how you got along without one for so long. ![]() --Bob Prosperi |
|||
02-06-2018, 08:14 AM
Post: #35
|
|||
|
|||
RE: pyILPER 1.6.0 and LIFUTILS 1.7.7 final release
(02-06-2018 12:42 AM)rprosperi Wrote: Great, looks like all is working properly. yeah, indeed! ![]() It's a must have for whom like HP41 and HP71. Salvo ∫aL√0mic (IT9CLU) :: HP Prime 50g 41CX 71b 42s 39s 35s 12C 15C - DM42, DM41X - WP34s Prime Soft. Lib |
|||
« Next Oldest | Next Newest »
|
User(s) browsing this thread: 1 Guest(s)