Post Reply 
pyILPER 1.6.0 and LIFUTILS 1.7.7 final release
02-04-2018, 06:07 PM
Post: #21
RE: pyILPER 1.6.0 and LIFUTILS 1.7.7 final release
(02-04-2018 12:34 PM)Geir Isene Wrote:  I have only tested taking the programs from the printer log - bacuase I need programs from my 41 to include in modules I create - and the printer log is the easiest way to do that.
Could you please provide me a little example (raw file preferred) of a HP-41 program with synthetic strings? You can also use the "View" function of the drive directory listing to obtain the FOCAL code of a HP-41 progam file.
Find all posts by this user
Quote this message in a reply
02-05-2018, 06:32 PM
Post: #22
RE: pyILPER 1.6.0 and LIFUTILS 1.7.7 final release
hi,
I'm trying but I need some help, as I get an error "illegal retval" and in the same time "not connected to pilbox". PILBOX is ok on COM3 (Windows) and works well with ILCtrl.

Thanks!
Salvo


Attached File(s) Thumbnail(s)
   

∫aL√0mic (IT9CLU) :: HP Prime 50g 41CX 71b 42s 39s 35s 12C 15C - DM42, DM41X - WP34s Prime Soft. Lib
Visit this user's website Find all posts by this user
Quote this message in a reply
02-05-2018, 07:04 PM
Post: #23
RE: pyILPER 1.6.0 and LIFUTILS 1.7.7 final release
Try searching for a solution first. This was posted only 4 days ago.

http://www.hpmuseum.org/forum/thread-10065.html
Find all posts by this user
Quote this message in a reply
02-05-2018, 07:30 PM (This post was last modified: 02-05-2018 09:00 PM by salvomic.)
Post: #24
RE: pyILPER 1.6.0 and LIFUTILS 1.7.7 final release
(02-05-2018 07:04 PM)Dave Frederickson Wrote:  Try searching for a solution first. This was posted only 4 days ago.

http://www.hpmuseum.org/forum/thread-10065.html

sorry, for now I'm inattentive, happy doing experiments with PILbox, new toy for me...
thank you Dave, I'll read there.

Salvo

EDIT:
Found (in Mac OS X): it works with 115200 and not with 230400 Bd in configuration of PILbox

∫aL√0mic (IT9CLU) :: HP Prime 50g 41CX 71b 42s 39s 35s 12C 15C - DM42, DM41X - WP34s Prime Soft. Lib
Visit this user's website Find all posts by this user
Quote this message in a reply
02-05-2018, 09:06 PM
Post: #25
RE: pyILPER 1.6.0 and LIFUTILS 1.7.7 final release
(02-05-2018 07:30 PM)salvomic Wrote:  sorry, for now I'm inattentive, happy doing experiments with PILbox, new toy for me...
thank you Dave, I'll read there.

Salvo

EDIT:
Found (in Mac OS X): it works with 115200 and not with 230400 Bd in configuration of PILbox


Salvo, the PIL-Box has a jumper that sets the baud-rate option 115KB or 230KB. The 230KB is obviously faster, but the 'feeling' is even faster than it sounds and I recommend using 230KB if you can; I am fairly sure it will work at 230KB on OSX, but what s/w are you using?

IL-Per under some Windows subsystem (parallels, etc.) or pyILPer ?

--Bob Prosperi
Find all posts by this user
Quote this message in a reply
02-05-2018, 09:40 PM
Post: #26
RE: pyILPER 1.6.0 and LIFUTILS 1.7.7 final release
(02-05-2018 09:06 PM)rprosperi Wrote:  Salvo, the PIL-Box has a jumper that sets the baud-rate option 115KB or 230KB. The 230KB is obviously faster, but the 'feeling' is even faster than it sounds and I recommend using 230KB if you can; I am fairly sure it will work at 230KB on OSX, but what s/w are you using?

IL-Per under some Windows subsystem (parallels, etc.) or pyILPer ?

hi Bob,
I'm testing pyILPer now.
Today I set cables and started with PILbox and I saw the jumper set was the #2; should I test put in in #3?

Salvo

∫aL√0mic (IT9CLU) :: HP Prime 50g 41CX 71b 42s 39s 35s 12C 15C - DM42, DM41X - WP34s Prime Soft. Lib
Visit this user's website Find all posts by this user
Quote this message in a reply
02-05-2018, 10:36 PM (This post was last modified: 02-05-2018 11:06 PM by salvomic.)
Post: #27
RE: pyILPER 1.6.0 and LIFUTILS 1.7.7 final release
(11-28-2017 06:37 PM)jsi Wrote:  This release of pyILPER includes lots of enhancements, improvements and changes, see the release notes for details.

Joachim

Thanks a lot, Joachim!
I'm enjoying very much with this program and PILbox (I find very good also ILper).
Installed with a glitch both in Mac OS X 10.13.3 and Windows 10 (inside Parallels 13).
I'm testing HP-41CX and HP-71b.

I'd like to have a set of preconfigured programs (LIF...) where to pick and install in the calculator (using the program not only to backup all - very important job - or printing, very amazing to get PDF from the "old machines")... Like a sort or "repository" (two series, for 71B and 41C) or "carry and cash (without cash)" of programs Smile
About this purpose, it would be nice to could edit the virtual devices (disks, LIF, DAT...) to put (not only delete) programs to load, then, in the calculator; with the goal to share nice configurations, sets,...
EDIT: though I'm testing to import with Tools from some ROMs, it is not exactly what I'd prefer: I would like to import some parts by a list of programs in them, not the whole ROM...

Salvo

∫aL√0mic (IT9CLU) :: HP Prime 50g 41CX 71b 42s 39s 35s 12C 15C - DM42, DM41X - WP34s Prime Soft. Lib
Visit this user's website Find all posts by this user
Quote this message in a reply
02-05-2018, 10:43 PM
Post: #28
RE: pyILPER 1.6.0 and LIFUTILS 1.7.7 final release
(02-05-2018 09:40 PM)salvomic Wrote:  hi Bob,
I'm testing pyILPer now.
Today I set cables and started with PILbox and I saw the jumper set was the #2; should I test put in in #3?

Salvo

No, JP3 is not used.

JP2 - Jumper ON - 115KB
JP2 - Jumper OFF - 230KB

So just remove the jumper.

--Bob Prosperi
Find all posts by this user
Quote this message in a reply
02-05-2018, 10:52 PM
Post: #29
RE: pyILPER 1.6.0 and LIFUTILS 1.7.7 final release
(02-05-2018 10:43 PM)rprosperi Wrote:  No, JP3 is not used.

JP2 - Jumper ON - 115KB
JP2 - Jumper OFF - 230KB

So just remove the jumper.

ok!
Then, removing JP2 now in Mac OS X the program runs at 230KB (and returns "illegal retval at 115KB).
For me is ok, thanks for advice.

Salvo

∫aL√0mic (IT9CLU) :: HP Prime 50g 41CX 71b 42s 39s 35s 12C 15C - DM42, DM41X - WP34s Prime Soft. Lib
Visit this user's website Find all posts by this user
Quote this message in a reply
02-05-2018, 11:06 PM
Post: #30
RE: pyILPER 1.6.0 and LIFUTILS 1.7.7 final release
(02-05-2018 10:43 PM)rprosperi Wrote:  No, JP3 is not used.

JP3 fixes an issue with some 1A HP-IL modules for the 71B.

http://www.hpmuseum.org/forum/thread-100...l#pid89843

Dave
Find all posts by this user
Quote this message in a reply
02-05-2018, 11:08 PM
Post: #31
RE: pyILPER 1.6.0 and LIFUTILS 1.7.7 final release
(02-05-2018 11:06 PM)Dave Frederickson Wrote:  JP3 fixes an issue with some 1A HP-IL modules for the 71B.

http://www.hpmuseum.org/forum/thread-100...l#pid89843

Dave

thanks.
Mine is 1A (in HP71 1BBBB).

Salvo

∫aL√0mic (IT9CLU) :: HP Prime 50g 41CX 71b 42s 39s 35s 12C 15C - DM42, DM41X - WP34s Prime Soft. Lib
Visit this user's website Find all posts by this user
Quote this message in a reply
02-05-2018, 11:11 PM
Post: #32
RE: pyILPER 1.6.0 and LIFUTILS 1.7.7 final release
Sorry, Dave's right, I was not clear; JP3 is not used for setting baud rate...

--Bob Prosperi
Find all posts by this user
Quote this message in a reply
02-05-2018, 11:16 PM
Post: #33
RE: pyILPER 1.6.0 and LIFUTILS 1.7.7 final release
(02-05-2018 11:11 PM)rprosperi Wrote:  Sorry, Dave's right, I was not clear; JP3 is not used for setting baud rate...

Understood, thanks Smile
For now I'll keep JP2 off and JP3 off; if there will be issues I'll try JP3 on.
I checked JP2 off in Mac OS X and Windows 10 also: ok with 230kb in pyILper and ILCtrl. Also in Windows, now at 115KB pyILper returns "illegal retval".

salvo

∫aL√0mic (IT9CLU) :: HP Prime 50g 41CX 71b 42s 39s 35s 12C 15C - DM42, DM41X - WP34s Prime Soft. Lib
Visit this user's website Find all posts by this user
Quote this message in a reply
02-06-2018, 12:42 AM
Post: #34
RE: pyILPER 1.6.0 and LIFUTILS 1.7.7 final release
(02-05-2018 11:16 PM)salvomic Wrote:  Understood, thanks Smile
For now I'll keep JP2 off and JP3 off; if there will be issues I'll try JP3 on.
I checked JP2 off in Mac OS X and Windows 10 also: ok with 230kb in pyILper and ILCtrl. Also in Windows, now at 115KB pyILper returns "illegal retval".

salvo

Great, looks like all is working properly.

You'll love the PIL-Box and wonder how you got along without one for so long. Smile

--Bob Prosperi
Find all posts by this user
Quote this message in a reply
02-06-2018, 08:14 AM
Post: #35
RE: pyILPER 1.6.0 and LIFUTILS 1.7.7 final release
(02-06-2018 12:42 AM)rprosperi Wrote:  Great, looks like all is working properly.

You'll love the PIL-Box and wonder how you got along without one for so long. Smile

yeah, indeed! Smile
It's a must have for whom like HP41 and HP71.

Salvo

∫aL√0mic (IT9CLU) :: HP Prime 50g 41CX 71b 42s 39s 35s 12C 15C - DM42, DM41X - WP34s Prime Soft. Lib
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 




User(s) browsing this thread: 1 Guest(s)