Are PIL-Boxes still available?
|
07-28-2024, 12:30 AM
Post: #41
|
|||
|
|||
RE: Are PIL-Boxes still available?
Just FYI, I was obviously the first person interested looking at this thread Put me down for two please. Thanks!
|
|||
07-30-2024, 01:21 AM
Post: #42
|
|||
|
|||
RE: Are PIL-Boxes still available?
Please include me in the list of interested customers also! Plagiarized GJ Carter's post
Randy |
|||
07-30-2024, 03:35 AM
Post: #43
|
|||
|
|||
RE: Are PIL-Boxes still available?
Quick update - the prototype boxes are performing well and a few design tweaks have been learned. The next design iteration is done and in the process for a beta run of units. As soon as those arrive and pass testing, I‘ll reach out and make sure people get their boxes asap.
Cheers, PeterP |
|||
07-30-2024, 10:56 AM
Post: #44
|
|||
|
|||
RE: Are PIL-Boxes still available?
Hi, kinda late to the party - also interested in bying one box once available.
Stay healthy and keep calculating, Jan |
|||
07-31-2024, 07:12 AM
Post: #45
|
|||
|
|||
RE: Are PIL-Boxes still available?
I would also like to be counted among interested prospective purchasers!
HP: 15CE, 16C, 28S, 48SX, 71B, 200LX, DM41X, DM42 TI: 66, 74, 95, 92 Plus / Casio: fx-603p / Sharp: PC-1262, PC-G850V |
|||
08-02-2024, 06:08 PM
Post: #46
|
|||
|
|||
RE: Are PIL-Boxes still available?
Don't forget me. I want one too
|
|||
08-04-2024, 08:09 AM
Post: #47
|
|||
|
|||
RE: Are PIL-Boxes still available?
hi, i’m another one interested to buy a pil-box or new replacement, please count me in
greetings from Offenbach, Germany [41C|CV|CX 10C/12C/15C/18C 48GX|SX/49G/50G 71B] |
|||
08-09-2024, 10:20 AM
Post: #48
|
|||
|
|||
RE: Are PIL-Boxes still available?
Hi Peter,
Yep, count me in as well for one (or two?) of the new PIL-Boxes. I'd probably go for one of the pre-assembled ones rather than a kit. Thanks, -Jeff |
|||
08-20-2024, 10:06 PM
Post: #49
|
|||
|
|||
RE: Are PIL-Boxes still available?
I am interested in a PIL-Box too. I just got a HP-71B.
|
|||
08-21-2024, 05:17 AM
Post: #50
|
|||
|
|||
RE: Are PIL-Boxes still available?
Looks fantastic. I want one as well. Don’t really care about the price (within reason).
|
|||
08-22-2024, 06:53 AM
Post: #51
|
|||
|
|||
RE: Are PIL-Boxes still available?
I am also interested.
Own: HP-45:HP-41CX:HP-32SII:HP 6S:HP-42S(32K):HP-35s:HP-48GX:HP-15C CE I/O: HP82242A:HP82240B:HP82104A |
|||
08-22-2024, 02:58 PM
Post: #52
|
|||
|
|||
RE: Are PIL-Boxes still available?
I'm interested as well! Thanks for the good work!
Klaus 11C|41CX (half)|41CX (full),ETS turbo|48G, Lorenz Comp 256k|34C| 41CV (full), misc. ROMs, periph.s, IL (in order of appearance)|15C CE |
|||
08-22-2024, 04:03 PM
Post: #53
|
|||
|
|||
RE: Are PIL-Boxes still available?
(06-21-2024 11:08 AM)PeterP Wrote: I propose smdPIL-Box given the choice of components, size, etc. That's great to hear! My which list (as for now) would be complete if the DM41X had HP-IL capabilities over its USB connector - someone from SwissMicros reading this? Cheers! Frido |
|||
08-28-2024, 02:11 AM
Post: #54
|
|||
|
|||
RE: Are PIL-Boxes still available?
I'm curious... is HPIL used anywhere in the real world? or is it just we old-timers who just want to play with it again?
|
|||
08-28-2024, 02:44 AM
Post: #55
|
|||
|
|||
RE: Are PIL-Boxes still available?
How did you decide on the 78601/1JC, other than the fact that it's the first that comes up on digikey when searching for general-purpose 1:1 pulse transformers?
I've read through 82166, and I didn't see any guidelines for picking the pulse transformers. |
|||
08-28-2024, 03:06 AM
Post: #56
|
|||
|
|||
RE: Are PIL-Boxes still available? | |||
08-28-2024, 07:43 AM
(This post was last modified: 08-28-2024 08:03 AM by J-F Garnier.)
Post: #57
|
|||
|
|||
RE: Are PIL-Boxes still available?
(08-28-2024 02:11 AM)John Ioannidis Wrote: I'm curious... is HPIL used anywhere in the real world? or is it just we old-timers who just want to play with it again? HP-IL has been in use in the HP 5890 Series of Gas Chromatograph under the name of "INET", long after the end of the HP-IL for calculators. For long, spare boards for these products were a source of HP-IL components. (08-28-2024 02:44 AM)John Ioannidis Wrote: How did you decide on the 78601/1JC, other than the fact that it's the first that comes up on digikey when searching for general-purpose 1:1 pulse transformers? I selected the transformer based on Hans Brueggemann's measurements, see here. If interested, it can be worth to read the entire thread, there are a lot of information on the subject. J-F |
|||
08-28-2024, 07:34 PM
Post: #58
|
|||
|
|||
RE: Are PIL-Boxes still available?
(08-28-2024 07:43 AM)J-F Garnier Wrote:(08-28-2024 02:11 AM)John Ioannidis Wrote: I'm curious... is HPIL used anywhere in the real world? or is it just we old-timers who just want to play with it again? Very nice! Thank you! |
|||
08-30-2024, 01:28 PM
Post: #59
|
|||
|
|||
RE: Are PIL-Boxes still available?
(08-28-2024 02:11 AM)John Ioannidis Wrote: I'm curious... is HPIL used anywhere in the real world? or is it just we old-timers who just want to play with it again? Hi John, I'd say that the HP-IL module was essential to communicate with the HP-IL printer (HP 82162A) and the mass storage device (HP 82161A). Anyone who has one of those needs the IL module. There were also other devices such as the video interface (HP 82163), serial interface (HP 82164A), GPIO interface (HP 82165A) etc. I personally own a digital multimeter with HP-IL connectivity (HP 3468A). Apart from those old-days devices, the recent HP-IL box offers a serial connectivity through USB. The software bundle from Jean-François Garnier and Christoph Giesselink allows the connectivity to and within a computer (via TCP/IP). With this it is not only possible to get data to and from the computer but it would be therotically also possible to e.g., read out a device in Tokyo, print the results in Cape Town, store the data in Buenos Aires and control this from New York - that is the HP-IL loop taken to its extremes. Maybe not something essential in the real world but a convenient tool that outsiders would categorize as toy. Cheers Frido |
|||
09-30-2024, 01:17 AM
Post: #60
|
|||
|
|||
RE: Are PIL-Boxes still available?
Any update on the new version?
|
|||
« Next Oldest | Next Newest »
|
User(s) browsing this thread: Maxdao, 2 Guest(s)