Post Reply 
(SR-56) Programmieren mit dem Taschenrechner SR-56
09-13-2024, 03:29 PM
Post: #1
(SR-56) Programmieren mit dem Taschenrechner SR-56
For our German readers, Programmieren mit dem Taschenrechner SR-56, Erste Auflage 1978, J. Schärf, H. Schierer, W. Baron, © Oldenbourg, 163 pages

1. Grundlagen            9 -  48
     1-10
2. Programmierung   49 -  83
    11-16
3. Anwendung          84 - 161
    {27 subsections}
BEST!
SlideRule
Find all posts by this user
Quote this message in a reply
09-14-2024, 09:52 AM
Post: #2
RE: (SR-56) Programmieren mit dem Taschenrechner SR-56
Although I am not German, I would like to thank you very much for the document.
Find all posts by this user
Quote this message in a reply
09-14-2024, 10:50 AM
Post: #3
RE: (SR-56) Programmieren mit dem Taschenrechner SR-56
Gerne

Best!
SlideRule
Find all posts by this user
Quote this message in a reply
09-14-2024, 07:58 PM (This post was last modified: 09-14-2024 08:00 PM by Nihotte(lma).)
Post: #4
RE: (SR-56) Programmieren mit dem Taschenrechner SR-56
(09-13-2024 03:29 PM)SlideRule Wrote:  For our German readers,
...
Programmieren mit dem Taschenrechner SR-56,
...
BEST!
SlideRule

Hello everyone !

Thanks, SlideRule!

Nostalgia sequence!
In my high school, around 1981-1983, introduction to computers was done with this calculator and other SR-52s!!

Keep yourself healthy!

Laurent
Find all posts by this user
Quote this message in a reply
09-14-2024, 11:43 PM
Post: #5
RE: (SR-56) Programmieren mit dem Taschenrechner SR-56
More to come.

BEST!
SlideRule
Find all posts by this user
Quote this message in a reply
09-15-2024, 10:01 AM
Post: #6
RE: (SR-56) Programmieren mit dem Taschenrechner SR-56
(09-13-2024 03:29 PM)SlideRule Wrote:  For our German readers, Programmieren mit dem Taschenrechner SR-56, Erste Auflage 1978, J. Schärf, H. Schierer, W. Baron, © Oldenbourg, 163 pages

1. Grundlagen            9 -  48
     1-10
2. Programmierung   49 -  83
    11-16
3. Anwendung          84 - 161
    {27 subsections}
BEST!
SlideRule

Hello SlideRule, thank you very much, I have been thinking about adding an SR-56 to my collection for a while. I think the decision has now been made ;-).

Best regards
Joerg
Find all posts by this user
Quote this message in a reply
09-15-2024, 02:55 PM
Post: #7
RE: (SR-56) Programmieren mit dem Taschenrechner SR-56
Hello!

(09-15-2024 10:01 AM)joeres Wrote:  …I have been thinking about adding an SR-56 to my collection for a while. I think the decision has now been made ;-).

With a little luck you can get the one that is currently being offered on german (ex eBay) classifieds (Kleinanzeigen). It seems to be working and the price is OK. But I am not the seller so I don’t know for sure.
I remember that it took me very long to find a working one for a decent price, much longer than th SR-52.

Regards
Max
Find all posts by this user
Quote this message in a reply
09-16-2024, 05:11 AM
Post: #8
RE: (SR-56) Programmieren mit dem Taschenrechner SR-56
(09-15-2024 02:55 PM)Maximilian Hohmann Wrote:  Hello!
...
With a little luck you can get the one that is currently being offered on german (ex eBay) classifieds (Kleinanzeigen). It seems to be working and the price is OK. But I am not the seller so I don’t know for sure.
...
Regards
Max

Many thanks for the tip.

The video “HHC 2016: In Praise of the SR-56 Calculator” by Gene Wright (https://www.youtube.com/watch?v=oDtWB5ebssw) is fine, great, thank you very much.

Best regards,
Joerg
Find all posts by this user
Quote this message in a reply
09-16-2024, 09:01 AM
Post: #9
RE: (SR-56) Programmieren mit dem Taschenrechner SR-56
Hello!

(09-16-2024 05:11 AM)joeres Wrote:  The video “HHC 2016: In Praise of the SR-56 Calculator” by Gene Wright (https://www.youtube.com/watch?v=oDtWB5ebssw) is fine...

Indeed! I never attended one of the conferences in the US (and most probably never will) but I always watch the videos. After seeing this one I had to have an SR-56 :-)

Regards
Max
Find all posts by this user
Quote this message in a reply
09-16-2024, 09:49 AM
Post: #10
RE: (SR-56) Programmieren mit dem Taschenrechner SR-56
A nice reading, just not to forget how non hp programmable calculators were.



Put a calculator into your life!
Visit this user's website Find all posts by this user
Quote this message in a reply
09-16-2024, 07:15 PM (This post was last modified: 09-16-2024 09:09 PM by Thomas Klemm.)
Post: #11
RE: (SR-56) Programmieren mit dem Taschenrechner SR-56
Cubic equation \(x^3 + ax^2 + bx + c = 0\)

A real root is calculated using Newton's approximation method.
Then the roots \(x_2\) and \(x_3\) are calculated from the quadratic equation \(x^2 + px + x = 0\) with \(p = a + x_1\) and \(q = x_1^2 + a x_1 + b\).

This is a translation of the program on page 108 for the HP-25:
Code:
01: 24 00    : RCL 0        ; x_i
02: 14 74    : f PAUSE      ; >>> x_i <<<
03: 24 01    : RCL 1        ; a
04: 51       : +            ; a+x_i
05: 23 04    : STO 4        ; R4 = a+x_i
06: 24 00    : RCL 0        ; x_i
07: 61       : *            ; x_i*(a+x_i)
08: 23 07    : STO 7        ; R7 = x_i*(a+x_i)
09: 24 02    : RCL 2        ; b
10: 51       : +            ; x_i*(a+x_i)+b
11: 23 05    : STO 5        ; R5 = x_i*(a+x_i)+b
12: 24 00    : RCL 0        ; x_i
13: 61       : *            ; x_i*(x_i*(a+x_i)+b)
14: 24 03    : RCL 3        ; c
15: 51       : +            ; x_i*(x_i*(a+x_i)+b)+c = f(x_i)
16: 24 07    : RCL 7        ; x_i*(a+x_i)
17: 24 00    : RCL 0        ; x_i
18: 15 02    : g x^2        ; x_i^2
19: 51       : +            ; 2x_i^2+ax_i
20: 24 05    : RCL 5        ; x_i*(a+x_i)+b
21: 51       : +            ; 3x_i^2+2ax_i+b = f'(x_i)
22: 71       : /            ; Δx = f(x_i)/f'(x_i)
23: 23 41 00 : STO - 0      ; x_{i+1} = x_i - Δx
24: 15 03    : g ABS        ; |Δx|
25: 24 06    : RCL 6        ; ε
26: 14 41    : f x<y        ; ε < |Δx|
27: 13 01    : GTO 01       ; not enough
28: 24 00    : RCL 0        ; x_1
29: 74       : R/S          ; === x_1 ===
30: 24 04    : RCL 4        ; p = a+x_1
31: 02       : 2            ; 2     p
32: 71       : /            ; p/2
33: 32       : CHS          ; -p/2
34: 31       : ENTER        ; -p/2   -p/2
35: 31       : ENTER        ; -p/2   -p/2     -p/2
36: 15 02    : g x^2        ; p^2/4  -p/2     -p/2
37: 24 05    : RCL 5        ; q = x_i*(a+x_i)+b p^2/4   -p/2    -p/2
38: 41       : -            ; D = p^2/4 - q     -p/2    -p/2    -p/2
39: 15 51    : g x>=0       ; D >= 0
40: 13 45    : GTO 45       ; 2 real roots
41: 32       : CHS          ; -D    -p/2    -p/2    -p/2
42: 14 02    : f SQRT       ; Im z_{2,3} = √-D
43: 21       : x<->y        ; Re z_{2,3} = -p/2
44: 13 00    : GTO 00       ; === z_{2,3} ===
45: 14 02    : f SQRT       ; √D  -p/2    -p/2    -p/2
46: 41       : -            ; x_3 = -p/2 - √D     -p/2
47: 21       : x<->y        ; -p/2      x_3
48: 14 73    : f LASTx      ; √D        -p/2      x_3
49: 51       : +            ; x_2 = -p/2 + √D     x_3

Examples

Set degree of accuracy:

EEX -6 STO 6



\(x^3 -19x^2 + 81x + 101 = 0\)
\(x_0 = 1\)

1 STO 0
-19 STO 1
81 STO 2
101 STO 3

f CLEAR PRGM
R/S

-1.000000000

R/S

10.00000000

x<->y

1.000000000

\(
\begin{align}
x_1 &= -1 \\
x_2 &= 10 + i \\
x_3 &= 10 - i \\
\end{align}
\)



\(x^3 -13x^2 + 20x + 100 = 0\)
\(x_0 = 2\)

2 STO 0
-13 STO 1
20 STO 2
100 STO 3

f CLEAR PRGM
R/S

5.000000000

R/S

10.00000000

x<->y

-1.999999999

\(
\begin{align}
x_1 &= 5 \\
x_2 &= 10 \\
x_3 &= -2 \\
\end{align}
\)



It is interesting that we can squeeze the 86 unmerged steps of the SR-56 into the 49 maximum steps of the HP-25.
It seems to me that the quality of these programs is better than that of the Applications Library.
For examples, compare "Greatest Common Divisor/Least Common Multiple" with "Größter gemeinsamer Teiler und kleinstes gemeinsames Vielfaches".
Or then "First Order Differential Equations" with "Runge-Kutta-Verfahren für Differentialgleichungen 1. Ordnung": the latter uses 4th order while the former uses only 3rd order.
Find all posts by this user
Quote this message in a reply
09-17-2024, 01:40 PM
Post: #12
RE: (SR-56) Programmieren mit dem Taschenrechner SR-56
Vielen Dank!

(09-13-2024 03:29 PM)SlideRule Wrote:  For our German readers, Programmieren mit dem Taschenrechner SR-56, Erste Auflage 1978, J. Schärf, H. Schierer, W. Baron, © Oldenbourg, 163 pages

1. Grundlagen            9 -  48
     1-10
2. Programmierung   49 -  83
    11-16
3. Anwendung          84 - 161
    {27 subsections}
BEST!
SlideRule
Find all posts by this user
Quote this message in a reply
Post Reply 




User(s) browsing this thread: 5 Guest(s)